Yes, probably have noticed that during the installation of new windows and specifically when selecting PartitionMagic install the system phase, where the notes within Bartishnat hard drive under Review, PartitionMagic called Recovery consumes area, 450 MB or maybe much more than that but you do not find this Albartishn after you install Windows and access to the File Explorer and even when doing formate fully Hard disk and begin to re-divide it again, you'll notice that this Albartishn are created automatically without you select the area to him during the partition. So what is this section Recovery and usefulness Do I have to delete and remove it to get a space in the hard disk and if so, how it is removed? This is what we are going to Review of Below In the next lines.
At first if you want to know Is PartitionMagic Recovery already is on your computer or not, area, which operated from the hard disk, you can check it easily by clicking on the button logo Windows + the letter R on the keyboard to show you a window Run, where you write out "compmgmt.msc" command then press Enter and the window Click on Disk Management from the left and from within the sections that will display search for Recovery Partition it will appear is Albartishn you're talking about.
- What is PartitionMagic Recovery?
Is a section of the operating system to use and benefit from it in case of any problems or malfunction of the system boot or other words, when the fall of the windows he can refer to this Albartishn and then starts to recover missing files or required until the system is functioning normally and without problems, so it will be used when doing a factory reset of the Windows operating system to resolve all the mistakes and problems and maintenance of the system entirely, this is the only job PartitionMagic Recovery.
Although you can dispense with this Albartishn to save space and create a restore point, or create a restore disk via a USB memory stick, but that it is not easy and must be played in this process properly so as to avoid grounded Windows problems again which makes you have to re-install a new copy for you lost Albartishn which solves boot problems. So if you are thinking of deleting PartitionMagic Recovery in order to save space of 450 MB, it is a bad idea and you can save more space than that by following the methods of providing space in the hard disk, but it may sometimes overcomes area, 450 Mega, where one user found that he holds 10 GB of hard In this case it advised to delete it and create a restore disc and best Here's how to do it without software.
To make the process of deleting PartitionMagic Recovery without the use of third-party software is simple and very easy Valammer in which we use the commands CMD in Windows prompt, but you must run the command prompt the powers of the manager and this by clicking right click on the icon Start menu or click on the button Windows logo + X symbols and menu press the option will appear (Command Prompt (Admin to show you the black for the window with the command prompt to do the typing the following commands.
In the window of the command prompt, enter the first is a "Diskpart" then press Enter, and then enter is "List disk" and then click on the Inter button will be displayed volumes connected device. If you use more than one hard or there is a memory stick connected to the device you can select MySpace Balhard Protein content by PartitionMagic Recovery then you enter is "Select disk 0" note that "0" here is the disk number, and then clicking on the button enter enter is "List volume" to be reviewing all Bartishnat this disk, including the hidden sections including Recovery section, which We would like to delete and through the introduction is "4 Select volume" and also "4" here means Albartishn number as shown in the list of Albartishnat on the command prompt, and then click the enter button enter is "delete volume" and it will be removed immediately.
Posts
Nice info....
ReplyDelete